Single Seat Mixproof Valve

Single Seat Mixproof Valve

Article number:

Available for pre-order

Size

1.5"
  • 1.5"
  • 2"
  • 2.5"
  • 3"

Material

AISI 304
  • AISI 304
  • AISI 316 L

Gaskets

EPDM
  • EPDM
  • FPM
  • Silicone
Send a request
Description

    The Stainless Steel Sanitary Grade Single Seat Mixproof Valve offers sizes from DN40 to DN100 and operates at a maximum pressure of 6BAR with a working temperature range of -10°C to +120°C. It features a RA0.5um surface finish, SS304 or SS316L contacted parts, and uses EPDM, silicone, or FPM sealing. Ideal for easy maintenance and CIP cleaning, it is suitable for use in food, beverage, and pharmaceutical industries, with welded, threading, or triclover connections.


    Full description

    Features of the Stainless Steel Sanitary Grade Single Seat Mixproof Valve:

    Size: DN40-DN100;  11/2”-4”

    Max. Pressure: 6BAR

    Working temperature:-10℃ to +120℃

    Air connection size: R1/”

    Surface: Inner RA0.5um

    The contacted parts: SS304 or SS316L

    Sealing: EPDM, silicone or FPM

    Connection type: welded, threading, triclover end

    Limit switch type: 6-36V  DC  2-3 nos NPN or PNP

    C top: AS-I connection  24-48V AC/DC 3个PNP/NPN  

    Max travel range≤80mm

    Less space

    Easy maintenance

    No dead angle

    No contacting between drain system and products

    The separating chamber cleaning does not occur any hydraulic-pressure

    CIP cleaning can be done any time whenever the valve is open or close

    The single seat mixproof valve is controlled by the pressed air. Normally the valve is closed. There are two small pneumatic valves in the two sides of the mixproof valve. One is detecting valve. The other is CIP valve.

    Capital repair and modernization of equipment

    • development of design documentation
    • modernization and restoration
    • FAT, SAT, IQ/OQ
    Send a request
    Save up to 40% on the cost and delivery time of tank equipment

    Overhaul of screws for ampoule/vial transportation

    • repair inserts
    • restoration of mounting seats
    • еlimination of runout
    Send a request
    Save up to 50% on screw cost and delivery time

    Overhaul of needles for aseptic drug filling

    • needle tip restoration
    • tube replacement
    • polishing
    Send a request
    Save up to 45% on the cost of needles and delivery terms

    CNC machining within 72 hours based on your model

    • production time — from 72 hours
    • anodizing and finishing
    • engineering design tailored to your task
    • comprehensive approach — from sketch to packaging
    Send a request
    Prompt order fulfillment without compromising quality